Fibreglass loft insulation is by far the most considered by UK households when they plan to insulate their loft space. This is mainly because fibreglass or blanket loft insulation materials are much easier to use and available at cheaper rates. Yet , such insulation will not call and make an exception to the rule that every element comes with positive and negative aspects. Loft Insulation
Fibreglass efficiency materials are sold in rolls and it are incredibly easy to find as they are available in just about any of your local DIY stores. As a result of easy procedure of laying fibreglass insulation, you do not hire padding contractors and build up padding costs with labour charges. Hence, this insulation process is viable to adopt over as a DIY attic insulation project. The fibreglass loft insulation materials are usually sold in progresses that measure 400mm or 16inches wide, whereas the thickness of the materials ranges from 100mm or 4inches to 200mm or 8inches. UK-based houses are recommended to lay fibreglass insulation at a minimum amount thickness of 200mm. Intended for thinner insulation rolls, advised depth is suitable only if the additional padding is laid on top of the existing efficiency to obtain 200mm thickness.
Prior to you lay the materials, measure the entire joist space across the loft space area and count the amount of joists to estimate the whole area to receive attic insulation treatment. Despite easily availability, easiness of use and reasonable rates, fibreglass loft insulation products require some degree of extreme care for installers. Manufacturers of fibreglass materials advise some precautions while laying this insulation.
Moreover, fibres of such materials are likely to be horrendous when offered into contact with human pores and skin. One needs to cover their noses and confronts with masks to prevent inhaling them, as they cause irritation to throats if inhaled. Installers must cover their eyes and arms too. They have to be clad in a cap, goggles, gloves and hide. However, the good thing is that after getting put on these clothing items properly, the process of laying the fibreglass becomes clear of risks. At the same time, a roof top area, after it has received loft insulation treatment, can block substantial temperature loss, thus making your house energy efficient enough to save energy and money from being put in on energy bills.